Subscribe to continue reading
Subscribe to get access to the rest of this post and other subscriber-only content.
Tag: safety
-
Hidden Fire Hazards in Austin Homes
What We Keep Finding Behind the Walls
by Craig Dunman, Master Electrician
Austin homes are a mixed bag. You’ve got 1950s ranchers, 1980s flips, 2000s builder-grade boxes, and everything in between — all wired to whatever code was current at the time. Problem is, most of those systems were never upgraded. And when the wiring hasn’t been touched in decades, there’s often a fire hazard just waiting to surface.
Here’s what we’re still pulling out of homes all over Austin and the surrounding area — and why it matters.
Federal Pacific Panels (FPE)
If your home still has a Federal Pacific panel — or anything labeled “Stab-Lok” — stop waiting. These breakers are known to fail under overload. When that happens, instead of tripping like they’re supposed to, they stay live and let wires overheat. Plenty of house fires across the country have started this way, and Austin is no exception.
They haven’t passed UL listing in years, and they’re not compliant with modern standards under NEC 240.60. These panels are NOT fixable. They ARE dangerous. Replacement is necessary to ensure your safety.
Zinsco / Sylvania Panels
Zinsco panels were common through the ’60s and ’70s. We still find them in older areas of Austin.
The biggest issue? The breakers can fuse to the bus bar, so when there’s a short or fault, the panel doesn’t cut power. That means your wiring can overheat, arc, and catch fire — with no breaker ever flipping. Always remember “Arcs make sparks and sparks make fire.”
If your panel says “Zinsco” or “Sylvania,” have it replaced. These aren’t up to current safety expectations and can’t be trusted.
Aluminum Wiring (1965–1973)
If your house was built between 1965 and 1973 and hasn’t been rewired, you probably have aluminum branch circuits. These expand and contract far more than copper wiring when heated leading to loose connections over time. Loose connections lead to arcing. Arcing causes fires. Remember what we said above? “Arcs make sparks and sparks make…fire.”
Modern code (NEC 110.14) requires proper aluminum-rated connectors and antioxidant paste. If you’ve got aluminum and it’s untouched, it’s not code-compliant and not safe.
Overloaded Circuits
You’d be shocked how many Texas homes are running modern setups — think deep freezers, gaming PCs, tankless water heaters — on circuits designed for a rotary phone and a lightbulb.
We routinely find 15-amp circuits carrying 25 amps of load, especially in garages, kitchens, and add-on spaces like enclosed porches or sheds. When breakers trip repeatedly, or you have warm outlets or flickering lights, that’s not “annoying.” That’s your system saying, I can’t carry this safely.
Under NEC 210.11, branch circuits must be sized and distributed appropriately. If you’ve added square footage, appliances, or even a hot tub without balancing your load? You’re out of compliance — and at risk.
Unlicensed Handyman Work (and DIY Jobs)
We don’t sugarcoat this. If you’re not licensed in Texas, you should not be touching electrical systems. That includes handymen, roofers, contractors, and homeowners. Watching YouTube or “doing it before” does not qualify you.
In Texas, electrical work without a license is illegal for a reason. It’s not about gatekeeping — it’s about protecting lives. Handymen doing unpermitted electrical work are not just breaking the law — they’re putting your family and your home at serious risk.
Cloth or Rubber-Insulated Wiring
Homes from the 1940s–60s — especially in Central Austin and older pockets of Georgetown — may still have original cloth-wrapped or early plastic-sheathed cable. This stuff deteriorates inside the walls, sometimes flaking apart the second it’s touched.
No grounding. No modern insulation. Just dry, brittle sheathing around live wires.
This isn’t “keep an eye on it” territory — it’s “replace this now” territory.
Final Word: Don’t Roll the Dice on Fire
You won’t always see the warning signs. Fires from electrical faults start behind your walls — fast, silent, and deadly. A panel that “still works” or a house that “hasn’t had problems” doesn’t mean it’s safe. It just means you’ve been lucky.
If you’re not sure what panel you have…
If you’ve got aluminum wiring and no paperwork saying it’s been remediated…
If your breakers trip every other day or someone unlicensed did your electrical…Book a licensed inspection.
It’s not overkill. It’s common sense.Call us today or reach out through our contact form to schedule!
-
Why Smoke Detectors Matter and How to Install Battery-Operated Models Yourself
by Craig Dunman, Master Electrician
Smoke detectors are among the most important safety devices in your home. We at Dunman Electric want to empower homeowners with the knowledge and confidence to protect themselves and their families. In this article, I’ll explain why smoke detectors save lives, clarify the difference between battery-operated and hardwired alarms, and provide a clear, step-by-step guide to installing your own battery-operated smoke detectors safely.
Smoke detectors detect the presence of smoke particles through ionization or photoelectric sensors. When smoke reaches the detector’s sensor, the device sounds a loud alarm to alert you and your family to potential danger.
According to the National Fire Protection Association (NFPA), working smoke alarms reduce the risk of dying in a home fire by nearly 50%. Many tragic fires happen at night when people are asleep and unaware. A smoke alarm’s loud signal provides early warning, giving everyone more time to escape safely.
Understanding Alarm Signals
- Continuous Loud Alarm: This means smoke or fire has been detected. Immediately evacuate your home and call emergency services.
- Intermittent Chirping: This signals low battery power or device malfunction. Replace the battery right away; don’t ignore the warning.
- No Sound During Test: If the alarm doesn’t sound during testing, replace batteries or the unit itself.
Battery-Operated vs. Hardwired Smoke Detectors: What’s the Difference?
There are two common types of smoke detectors you’ll find in homes:
Battery-Operated Smoke Detectors
- Power Source: Run solely on batteries (usually 9V or AA).
- Installation: Easy and quick—no wiring needed.
- Function: Standalone units, meaning each detector works independently. If one detects smoke, only that unit will sound an alarm.
- Maintenance: Batteries must be checked regularly and replaced at least once every 12 months. Some newer models come with sealed 10-year lithium batteries which allow for fewer battery replacements over time, but should still be tested monthly.
- Best For: Homes without existing wiring or as additional detectors for enhanced coverage.
Hardwired Smoke Detectors
- Power Source: Connected to your home’s electrical system, typically on a 120V circuit, with a battery backup in case of power failure.
- Installation: Requires electrical knowledge and proper wiring, best done by a licensed electrician.
- Function: Usually interconnected—when one alarm sounds, all alarms in the home sound simultaneously. This provides quicker alerts throughout the house.
- Maintenance: Battery backup needs periodic replacement; the main power supply is constant.
- Best For: New construction or full home safety systems.
Both types must meet Underwriters Laboratories (UL) standards to ensure that they have passed rigorous safety and reliability testing.
Step-by-Step Guide to Installing Battery-Operated Smoke Detectors
If you choose battery-operated alarms, you can install them yourself with these straightforward steps.
What You Need
- UL-listed battery-operated smoke detectors (look for the UL label on packaging)
- Appropriate batteries (usually 9V or AA; confirm with your unit’s instructions)
- Screwdriver (typically Phillips (+) head)
- Pencil
- Drill and wall anchors (optional, for drywall installations)
Installation Steps
- Select Proper Locations
- Inside every bedroom
- Outside each sleeping area (in hallways)
- On every level of your home, including the basement
- Avoid placing near windows, doors, or air vents where drafts can interfere
- Mount on the ceiling or high on a wall (smoke rises)
- Mark the Mounting Holes
Use the mounting bracket as a template. Hold it in place and mark the screw holes with a pencil. - Drill Pilot Holes (if needed)
For drywall or plaster, drill small holes or insert wall anchors to secure the screws firmly. - Attach the Mounting Bracket
Screw the bracket securely into the wall or ceiling. - Insert Batteries
Open the battery compartment and insert fresh batteries, ensuring correct polarity (+/-). - Mount the Detector
Attach the smoke detector to the bracket, usually by twisting or snapping it into place. - Test the Detector
Press the test button to verify the alarm sounds loudly. If it doesn’t, check the battery installation or replace batteries. - Maintain Regularly
- Test monthly to ensure operation.
- Replace batteries at least once a year, or as soon as the low battery chirp sounds.
- Replace the entire smoke detector every 10 years, as sensors can degrade over time. We recommend writing the date of install somewhere on the detector to ensure you know when to replace the unit.
Important Safety Notes
- Never disconnect a smoke detector to silence an alarm without investigating the cause.
- Avoid painting over detectors or covering them, as this can impair function.
- For homes with hardwired systems, consult a licensed electrician (like Dunman Electric) for installation or maintenance.
Helpful Safety Resources
For further safety guidance, visit these trusted sites:
- National Fire Protection Association (NFPA) – Smoke Alarm Safety
- U.S. Fire Administration – Smoke Detectors
- Consumer Product Safety Commission (CPSC) – Smoke Alarms
The Austin Fire Department has a free smoke alarm program for homeowners in the Austin area. For more information, visit their website here.
Final Thoughts
Smoke detectors are a simple, affordable, and essential part of home safety. Whether you install battery-operated models yourself or invest in hardwired systems, having properly functioning alarms can save lives. A detector that is installed incorrectly or does not work is as good as not having one at all.
If you have any questions about your home’s electrical safety or want professional help installing or upgrading smoke detectors- give us a call, shoot us an email, or reach out through our contact form and schedule a checkup today! Your safety is always our priority.