Subscribe to continue reading
Subscribe to get access to the rest of this post and other subscriber-only content.
Tag: home
-
Top Electrical Hazards in Austin Homes
Subscribe to continue reading
Subscribe to get access to the rest of this post and other subscriber-only content.
-
Texas P³: Surge Protection & Generators
⚡ POWER + PROTECT PROMO — Through July 2025⚡
The Texas power grid isn’t just unreliable — it’s become a liability. Anyone who lived through the 2021 Winter Storm Uri, the rolling blackouts of February 2022, or last year’s June ERCOT emergency notices knows this firsthand. The infrastructure simply can’t handle demand spikes or severe weather. That means high winds, lightning, power surges, and unexpected outages — year after year.
So let’s talk about what actually keeps your home running when the grid gives out:
Automatic transfer, manual transfer, and portable generators — and the one thing nearly everyone forgets: whole-home surge protection.
Manual Transfer Generators
What they are:
A hardwired backup generator that requires you to start it manually and flip a transfer switch to power certain parts of your home.How it works:
These run on propane, diesel, gasoline (in very specific installs), or natural gas and are installed outside the home. When the utility power fails, you physically start the generator and activate the manual transfer switch, which reroutes power to a secondary panel. Only the circuits wired to that panel will come online — usually essentials like lights, fridge, freezer, and maybe a few outlets or your HVAC (if it’s sized right).Best for:
Homeowners who want dependable backup without the higher cost of an automatic system, and who don’t mind going outside when the weather gets bad.
Automatic Standby Generators
What they are:
A fully automated backup system that detects outages and powers your home within seconds — even if you’re not there.How it works:
The generator is connected to your natural gas or propane line and wired into your main service panel. When the grid fails, the automatic transfer switch (ATS) kicks in and reroutes your entire home’s power through the generator. When power is restored, it flips back to the utility feed, all without you lifting a finger.Best for:
Homeowners who want uninterrupted power during storms or blackouts — especially those with freezers, medical equipment, sensitive electronics, or small children. These are also ideal for work-from-home setups where downtime costs money.
Portable Generators with Quick-Connect Kits
What they are:
Small gas-powered generators that you can roll out and connect to your home with a properly installed inlet box and interlock kit.How it works:
You manually start the generator and plug it into a designated outdoor inlet. From there, you flip specific breakers to transfer power to essential circuits. It’s not a whole-home solution, but it’s enough to run the basics if properly installed.⚠️ Critical Safety Warning:⚠️
A generator should only be connected through a dedicated outdoor inlet box, with a panel interlock or manual transfer switch installed by a licensed, bonded, and insured electrical contractor. This ensures your main breaker is disabled while the generator is live, preventing dangerous backfeed into the grid. Installing any generator power source without an appropriate interlock kit is illegal, violates the National Electrical Code, and can energize utility lines, potentially killing linemen working to restore power.
Best for:
Budget-conscious households that still want to avoid being completely in the dark during a storm.
Why Surge Protection Matters More Than You Think
Backup power is only half the equation. What most people don’t realize is that power restoration events, lightning strikes, and utility grid fluctuations can fry electronics long before the lights go out.
What it is:
A whole-home surge protector is a panel-mounted device that intercepts high-voltage spikes before they hit your circuits. These surges can be caused by lightning, utility switching, or damaged transmission lines.What it protects:
Everything downstream — including your refrigerator, HVAC, smart TVs, computers, EV chargers, solar inverters, pool equipment, and security systems. If it’s plugged in, it’s at risk.Fact:
Surge damage is not covered by most warranties. And those $15 power strips? They don’t cut it. You need layered defense:- Whole-home surge protection at the panel
- Secondary protection at the outlet (plug-in strips)
If you’ve ever:
- Replaced an AC board after a storm
- Lost a smart TV or modem randomly
- Had to reset half your house after a flicker
…you probably needed this yesterday.
How to Decide
We install manual, automatic, and portable quick-connect generator systems. We also retrofit homes for surge protection, check panels for age and load issues, and walk homeowners through real risk scenarios — not hypotheticals.
If you want:
- No effort, full home power → Go automatic + surge
- More control, lower cost → Manual + surge
- Bare-minimum prep → Portable + proper connect + surge
⚡ POWER + PROTECT PROMO — Through July 2025⚡
Right now, we’re offering a bundled, Texas-sized storm special:
- $75–$500 off generator installation, depending on the type of system you choose (manual, automatic, or portable quick-connect)
plus- Whole-home surge protection installation for just $222 (normally $349)
That’s full protection — backup power + surge defense — in one package, installed by licensed professionals who do it right the first time.
Questions? Ready for a site walk?
We’re licensed, local, and don’t push what you don’t need. We’ll tell you if your panel’s fine, if your wiring is outdated, or if there are any code-compliance updates you need to know about! No guesswork. No scare tactics. Just real answers.Call (512)280-8847 or reach out to us through our Contact Us page to schedule today and receive your free estimate and POWER + PROTECT Texas Storm Bundle!
Vocabulary Glossary
Term Definition Generator A machine that converts fuel into electrical power. Manual Transfer Switch A switch you operate by hand to shift power from the grid to your generator. Automatic Transfer Switch (ATS) A smart switch that detects outages and switches power automatically. Portable Generator A movable, gas-powered generator used for temporary backup power. Quick-Connect Kit A code-compliant inlet and breaker system to safely connect a portable generator. Whole-Home Surge Protector A panel-mounted device that blocks dangerous voltage spikes before they reach appliances. Voltage Surge A spike in electrical voltage that can damage or destroy electronics. Backfeeding When power flows the improper way, upstream, to the power company as opposed to downstream to your home. Grid The larger system of power lines and generation plants that provide your electricity.
- Whole-home surge protection at the panel
-
Get to Know Our Improved Site and Services (Subscriber Discount Inside)
Subscribe to continue reading
Subscribe to get access to the rest of this post and other subscriber-only content.
-
Hidden Fire Hazards in Austin Homes
What We Keep Finding Behind the Walls
by Craig Dunman, Master Electrician
Austin homes are a mixed bag. You’ve got 1950s ranchers, 1980s flips, 2000s builder-grade boxes, and everything in between — all wired to whatever code was current at the time. Problem is, most of those systems were never upgraded. And when the wiring hasn’t been touched in decades, there’s often a fire hazard just waiting to surface.
Here’s what we’re still pulling out of homes all over Austin and the surrounding area — and why it matters.
Federal Pacific Panels (FPE)
If your home still has a Federal Pacific panel — or anything labeled “Stab-Lok” — stop waiting. These breakers are known to fail under overload. When that happens, instead of tripping like they’re supposed to, they stay live and let wires overheat. Plenty of house fires across the country have started this way, and Austin is no exception.
They haven’t passed UL listing in years, and they’re not compliant with modern standards under NEC 240.60. These panels are NOT fixable. They ARE dangerous. Replacement is necessary to ensure your safety.
Zinsco / Sylvania Panels
Zinsco panels were common through the ’60s and ’70s. We still find them in older areas of Austin.
The biggest issue? The breakers can fuse to the bus bar, so when there’s a short or fault, the panel doesn’t cut power. That means your wiring can overheat, arc, and catch fire — with no breaker ever flipping. Always remember “Arcs make sparks and sparks make fire.”
If your panel says “Zinsco” or “Sylvania,” have it replaced. These aren’t up to current safety expectations and can’t be trusted.
Aluminum Wiring (1965–1973)
If your house was built between 1965 and 1973 and hasn’t been rewired, you probably have aluminum branch circuits. These expand and contract far more than copper wiring when heated leading to loose connections over time. Loose connections lead to arcing. Arcing causes fires. Remember what we said above? “Arcs make sparks and sparks make…fire.”
Modern code (NEC 110.14) requires proper aluminum-rated connectors and antioxidant paste. If you’ve got aluminum and it’s untouched, it’s not code-compliant and not safe.
Overloaded Circuits
You’d be shocked how many Texas homes are running modern setups — think deep freezers, gaming PCs, tankless water heaters — on circuits designed for a rotary phone and a lightbulb.
We routinely find 15-amp circuits carrying 25 amps of load, especially in garages, kitchens, and add-on spaces like enclosed porches or sheds. When breakers trip repeatedly, or you have warm outlets or flickering lights, that’s not “annoying.” That’s your system saying, I can’t carry this safely.
Under NEC 210.11, branch circuits must be sized and distributed appropriately. If you’ve added square footage, appliances, or even a hot tub without balancing your load? You’re out of compliance — and at risk.
Unlicensed Handyman Work (and DIY Jobs)
We don’t sugarcoat this. If you’re not licensed in Texas, you should not be touching electrical systems. That includes handymen, roofers, contractors, and homeowners. Watching YouTube or “doing it before” does not qualify you.
In Texas, electrical work without a license is illegal for a reason. It’s not about gatekeeping — it’s about protecting lives. Handymen doing unpermitted electrical work are not just breaking the law — they’re putting your family and your home at serious risk.
Cloth or Rubber-Insulated Wiring
Homes from the 1940s–60s — especially in Central Austin and older pockets of Georgetown — may still have original cloth-wrapped or early plastic-sheathed cable. This stuff deteriorates inside the walls, sometimes flaking apart the second it’s touched.
No grounding. No modern insulation. Just dry, brittle sheathing around live wires.
This isn’t “keep an eye on it” territory — it’s “replace this now” territory.
Final Word: Don’t Roll the Dice on Fire
You won’t always see the warning signs. Fires from electrical faults start behind your walls — fast, silent, and deadly. A panel that “still works” or a house that “hasn’t had problems” doesn’t mean it’s safe. It just means you’ve been lucky.
If you’re not sure what panel you have…
If you’ve got aluminum wiring and no paperwork saying it’s been remediated…
If your breakers trip every other day or someone unlicensed did your electrical…Book a licensed inspection.
It’s not overkill. It’s common sense.Call us today or reach out through our contact form to schedule!
-
Get to Know Our Improved Site and Services
We’re excited to share that our website has officially been updated! Whether you’re here from our newsletter or just browsing, here’s what’s new — and how it makes working with us easier.
Here’s What You’ll Find:
- Mobile-Friendly Layout
The new design works cleanly on phones, tablets, and desktops. No more zooming, dragging, or confusing clicks. - Simplified Navigation
Whether you’re looking to schedule work, ask a question, or learn something new, the information is easy to find and quick to access. - DIY Resource Section
We’ve added a growing library of safe, simple electrical tips for homeowners. From labeling your breaker box to installing battery-powered smoke alarms — if you can legally do it without a license, we’ll walk you through it. Clear steps. No overcomplication. Check out our Toolbox today to get started! - Kids’ Corner
Teaching safety starts early. We’ve created a dedicated section just for kids with activity pages and STEM projects to help them learn about electricity safely and hands-on! - Improved Privacy + Security
We’ve tightened everything behind the scenes — stronger form security, better password practices, and official company email addresses for all communication. Your info stays protected. - Exclusive Updates for Subscribers
If you’re already subscribed to our newsletter, you’ll now get first access to new DIYs, seasonal tips, and the occasional offer or service alert. We keep it useful — no spam, no noise. - 24/7 Chat features so we can help you around the clock!
Check out our socials too!
Want to see what we’re working on, learn more about our crew, or catch helpful reminders during storm season? Follow us here:
Thanks for stopping by — whether you’re here from your inbox or just exploring. This new version of the site is built with long-term usefulness in mind. Feel free to click around, try out the new features, and let us know what’s helpful (or what’s not — we can take it).
We’re glad you’re here.
- Mobile-Friendly Layout
-
Replacing Outlet and Switch Covers
by Craig Dunman, Master Electrician
Swapping out your outlet and light switch covers is one of the simplest ways to clean up a space. If the old ones are cracked, stained, or painted over from a rushed remodel or “landlord special,” replacing them makes an immediate difference. It’s a quick project — no special tools, no license required. Just grab a screwdriver, press play on your favorite podcast, and set aside a few minutes per room. You’ll be surprised how much fresher everything looks once those old plates are gone.
Tools needed:
- Flathead Screwdriver
- Optional: Voltage Tester
Is this safe to do?
Yes! As long as you’re working with just the cover plate, not the outlet or switch itself, this is entirely safe for you to do on your own! That plastic faceplate is just a shield. You’re not dealing with wires, terminals, or anything live unless you go poking around underneath, which you should not be doing.
Step-by-step:
1. Start smart.
Go ahead and unplug anything that’s plugged into the outlet that you’re working on. From there, it’s smart to flip the breaker for that part of the house to ‘off’ just as an added precaution.
If you have a voltage tester, now is the time to use it to double-check that there’s no power at the outlet before you get started. This part is optional, but helpful if you want that extra layer of reassurance.
Even though you’re just changing the cover and not messing with any wiring, cutting the power takes about ten seconds and keeps things simple.
2. Unscrew the old plate.
Use a flathead screwdriver. Most plates have a single screw in the center. Keep the screw if you’re reusing it, or swap it out with the one from the new plate.
3. Check the area around the outlet or switch.You should see a snug box in the wall with no loose wires. If anything looks burnt, cracked, or melted, pause here. That’s not a cosmetic fix anymore. You will need to give a licensed electrician a call. If everything looks good, move on to the next step!
4. Attach the new cover.
Line it up and screw it in gently. Don’t over tighten. Snug is enough. Overdoing it can crack the plate or twist the switch behind it.
5. Test it.
Flip your breaker back on if you flipped it off in step 1. Turn the light back on or plug something in. If everything works as expected, you’re good to go!
Tips & Tricks of the Trade:
- Match styles across the room or house. Clean lines go a long way.
- Nylon plates are stronger than the old brittle kind and won’t crack as easily.
- Paintable plates help them blend into the wall if you’re going for a seamless look.
- Screwless options are great for a modern feel — just make sure the base plate lines up clean.
When not to DIY this:
If the outlet is loose, if anything sparks or smells off, or if you see exposed wires moving when the cover comes off — STOP That’s the point where a licensed electrician should take over. Otherwise? This one’s all you. Simple, fast, and surprisingly satisfying.
If you are running into exposed wires, sparks, and odd smells OR you simply don’t want to bother with all of the fuss, give us a call and we’ll get it taken care of for you!
-
Texas Storm Prep 101
Protecting Your Electrical System
Texas storms don’t play. One minute it’s sunny, next minute you’ve got tumultuous rain, lightning strikes, and the power’s out. Wind, water, blown transformers—your electrical system takes the hit. Here’s how to prep without overthinking it:
1. Charge the Essentials — Now, Not Later
Storm’s not here yet? Good. Plug in your phone, backup chargers, power banks, tablets…If you want it to work later, plug it in now! Make sure to unplug your electronics and countertop appliances when lightning starts.
* Use power-saving mode on your phone just in case.
* Keep battery-powered flashlights in your most-used rooms.
* Stock fresh batteries in a known, dry place.
2. Unplug What You Don’t Need
Lightning surges can fry your electronics in seconds. If it doesn’t need to be running, unplug it.
* Focus on TVs, computers, gaming consoles, routers, and countertop appliances.
* Leave essentials like the fridge plugged in.
* Don’t wait for the flicker—do it before the storm rolls in.
3. Surge Protect Like You Mean It
Not all power strips are surge protectors. Check your gear.
* Look for the UL 1449 rating and a joule rating of at least 800.
* Move critical devices (routers, modems, entertainment setups, office equipment) to real surge protectors—not $5 strips from the junk drawer.
* If your surge protector’s older than five years or has taken a hit before, replace it!
At Dunman Electric, we install whole-house surge protectors, so if you don’t want to worry about this step in the future, give us a call! (512)280-8847
4. Know Your Breaker Panel
Power cuts and lightning strikes can trip breakers. You need to know how to reset them safely. We have a guide to resetting your breakers here!
* Never touch the panel with wet hands or while standing in water.
* Keep a flashlight or battery lantern near the breaker at all times.
* Reset breakers one at a time.
* If one keeps tripping after reset, something’s wrong. Call a licensed electrician.
5. Using a Generator? Know the Rules.
If you’re running a generator, follow safety protocol.
* Set it up outside— never in a garage or near vents.
* Plug devices directly into the generator unless you have a transfer switch installed.
* Let it cool fully before refueling. Hot engine +gas = explosion risk.
6. After the Storm: Walk the House
Once the storm has passed and lightning has not struck within 10 miles of your home for 30 minutes, do a walkthrough.
* Sniff for weird smells.
* Check for melted outlets, scorch marks, or anything that looks off.
* Check your breaker panel again.
* If something doesn’t look or smell right, or breakers keep tripping, stop and call a licensed electrician ASAP.
You don’t have to be an expert. Just take simple steps, in the right order, before the storm hits. Taking these steps will save you time, money, and a potential electrical fire.
Learn more about our Power & Protect Promo bundle to protect your home’s electrical system and gain peace of mind today!
-
Resetting Your Circuit Breaker Safely
by Craig Dunman, Master Electrician
What Is a Circuit Breaker?
A circuit breaker is a safety device in your electrical panel that automatically shuts off power to a specific circuit when it detects an overload or fault. Think of it as a guardian of your home’s wiring. If a breaker trips, it’s doing its job—stopping electricity before it can cause overheating, damage, or even a fire.
Circuit breakers replace older fuse systems and are now standard in modern homes. Each breaker is connected to specific areas or appliances in your home: kitchen outlets, air conditioners, lighting circuits, etc.
How Does a Breaker Work?
Breakers are designed with thermal and magnetic mechanisms that sense unsafe conditions:
- Thermal Trip (Overload Protection): A bimetallic strip heats up and bends as current exceeds safe levels. This bending eventually trips the switch.
- Magnetic Trip (Short Circuit Protection): A sudden surge, such as from a direct short, activates an internal electromagnet that instantly trips the breaker.
Each breaker is rated for a certain amperage—commonly 15, 20, or 30 amps. Exceeding that number, even momentarily, will trip it.
Why Do Breakers Trip?
Some common reasons include:
- Overloaded circuits – Too many devices on one circuit (e.g., space heater + microwave).
- Short circuits – A hot wire touches a neutral or ground, causing a surge.
- Ground faults – Similar to a short, but involves unintended contact with a ground path.
- Worn-out breakers or wiring – Age, damage, or improper installation can cause nuisance trips.
If a breaker trips once, it may just be a fluke. But if it happens again, there’s likely a deeper issue.
How to Safely Reset a Tripped Breaker
If your power goes out in one part of the house, follow these steps:
- Find your electrical panel. It’s usually in a garage, utility closet, or outside.
- Look for a breaker that’s in the “off” or middle position. A tripped breaker will often look slightly out of line with the others.
- Firmly switch it to the “off” position. Then back to “on.” You must do this in two distinct steps.
- Test your power. If it comes back on, you’ve successfully reset it.
⚠️ IMPORTANT: If the breaker trips again immediately, do not keep resetting it. You’re likely dealing with a more serious issue. ⚠️
When to Call a Licensed Electrician
Here’s when it’s best to leave it to the pros:
- A breaker trips repeatedly, even after unplugging devices.
- You smell burning or hear buzzing from the panel.
- The panel is hot to the touch or shows corrosion.
- Lights flicker or dim when major appliances start.
- You don’t know what’s causing the trip, or just want peace of mind.
Remember: Breakers trip for a reason. Continuously flipping them back on without fixing the root issue can be dangerous.
Bonus Tip: Label Your Breakers
Many homeowners don’t know which breaker controls what. Take time to label them clearly—this saves time during an outage and helps electricians work more efficiently when needed. This is also a service we offer here at Dunman Electric. Or you can read our article on how to label your panels on your own.
Whether you’re dealing with a stubborn breaker, need panel upgrades, or just want a professional inspection, Dunman Electric has you covered. Our licensed electricians bring decades of experience, and we’re happy to help you learn how to keep your home safe and efficient.
📞 Call us today or book online for prompt, reliable service.
-
Essential Guide to Labeling Your Breaker Panel
by Craig Dunman, Master Electrician
Why Labeling Your Breaker Panel Is Important
Your breaker panel is the command center for your home’s electrical system — but if the circuits aren’t labeled clearly, it becomes a guessing game.
In an emergency, during repairs, or when installing new equipment, knowing exactly which breaker controls what can save time, prevent injury, and avoid damage to your appliances or wiring. A clearly labeled panel is one of the simplest ways to make your home safer and more manageable.
Whether you’re a new homeowner or just never got around to organizing it, labeling your panel is something you can do yourself!
What You’ll Need
Before you begin, gather the following supplies:
[] A second person (for faster and more accurate testing)
[] Sticky notes or masking tape (for temporary labels)
[] Permanent marker (fine tip works best)
[] Notepad or printed circuit map
[] Plug-in device (lamp or outlet tester)
[] Phone or camera (to document your final layout)What Is a Circuit Map?
A circuit map is a written list or diagram that shows which circuit breaker powers which part of your home. This may be printed on the panel door, written on paper, or created digitally. Other terms for a circuit map include “Panel Schedule” or “Circuit Breaker Directory”. A complete map should include:
- The breaker number or position
- A specific description (For example: “Kitchen – Island Outlets” or “Master Bedroom – Lights”)
- Notations for special circuits like 240V appliances, smoke detectors, or outdoor outlets
This map is your reference guide for resetting breakers, shutting off electricity fast in an emergency, and helping service professionals do their jobs quickly and correctly.
Step-by-Step: How to Label Your Breaker Panel
1. Start with Safety
You will not be touching live wires, but you’ll be working inside the breaker panel. Stand on a dry surface, make sure your hands are dry, and only open the panel door — do not remove the metal cover or access the internal wiring.
2. Turn Off One Breaker at a Time
Have one person at the panel and the other inside the home. Flip a breaker off, then walk the home and check which lights, outlets, or appliances have lost power. Use a plug-in lamp or tester for quick verification.
3. Record What You Find
As each breaker is tested, write down everything it controls. Be as specific as possible — “Front Hall Light” is more useful than “Lights.”
Use sticky notes or tape to temporarily label each breaker directly on the panel.
4. Check Everywhere
Don’t forget:
- Closets, bathrooms, and hallways
- Garage, attic, and crawlspaces
- Exterior outlets and lighting
- Dedicated appliances (A/C, dryer, oven, water heater)
- Smoke and carbon monoxide detectors
- GFCI and AFCI protected areas
These may each be on their own circuits.
5. Apply Permanent Labels
Once every circuit has been identified, use your notes to create clean, permanent labels. Most electrical panels have a printed directory inside the door — fill this out legibly.
Then, take a photo of the finished panel. Keep one copy in your home files and one on your phone.
Tips from a Master Electrician
- Use consistent language throughout the panel.
- Be as specific as possible.
- Group related areas (kitchen circuits together, bedrooms in sequence).
- Update your labels any time changes are made.
What If You’d Rather Have It Done Professionally?
We get it! Not everyone wants to spend a weekend testing outlets and writing notes. At Dunman Electric, we offer full breaker panel labeling services.
Here’s what we do:
- Test every circuit in your home
- Create accurate, specific labels
- Provide a clean, printed and/or digital circuit map
- Flag any outdated, overloaded, or unsafe conditions we find during the process
Whether you’re moving in, upgrading your system, or just want things done right, we’re here to help.
Call us today to schedule your breaker labeling service — or ask about bundling it with a full safety inspection or panel upgrade.